Air Transport Publications
Login   |   Register
jobs Jobs
events Events
My bookmarks

Wheels down, brakes on

Wheel and brake maintenance is generally relatively simple, high-volume work, based on overhaul rather than repair. Overhaul is also critical to companies offering components harvested from retired airframes, while the wider industry has grown to offer a variety of wheel and brake availability and overhaul programmes, as Paul E Eden finds

Wheels and brakes, along with lubricants, are among the most predictable of an airline’s maintenance items. Brakes, ironically, tend not to break, but they do wear, and the majority of brake maintenance is overhaul and the associated replacement of components that wear naturally every time braking is employed. Confusingly, while a maintenance provider might replace an individual part within a brake unit during overhaul, the unit itself is generally considered as a single component.

Wheels are likely to suffer corrosion or damage from FOD. They should not be confused with tyres, although there is a necessary degree of overlap. Like brakes, tyres wear naturally in use and a wheel may be removed and its tyre replaced a few times – typically between four and six, depending on aircraft type – before the wheel requires overhaul, assuming no issues are identified during the basic inspection that accompanies an intermediate tyre change.

Phil Randell, owner and Accountable Manager of World Aero, a UK-based specialist wheel and brake MRO provider, described the business. “Wheel and brake maintenance is always on an on-condition basis, there’s generally never any scheduled maintenance. Many people outside the business assume we’re busier during the winter when more aircraft are in heavy maintenance, but in fact the opposite is true, because if an aircraft’s tyres and brakes have life left, they won’t be disturbed during heavy checks. But when an aircraft is operating, if the tyres or brakes are worn out, they’ll be removed. Our work is therefore driven by aircraft utilisation.”

Brake and tyre inspection fall under the regular tasks included in line maintenance and, Randell says, once a unit becomes worn sufficient to require replacement, “The brake unit or wheel is removed and a replacement fitted. The worn component then comes to us for refurbishment – wheel and brake maintenance is done off-wing (except for the 787, where on-wing maintenance of the aircraft’s electrical brake system is possible), and our main facility is not at an airport.

“On a modern, carbon brake we’d replace all the discs. They come as a ‘heat-pack assembly’ that replaces all the worn material. We also deal with leaks – brakes occasionally leak in service, and we also sometimes see leaks when we test units that come in for replacement worn heat-packs. With testing complete, we issue the unit with a release certificate, returning it to serviceable condition.”

World Aero’s airline clients typically pass wheel and brake units through the company on a regular rotation, while maintaining their stocks so that sufficient components are also available to service the fleet and provide airworthy spares. But it also works heavily with brokers managing maintenance on behalf of airlines and also with spares dealers, selling surplus or reclaimed stock. “We’re an MRO; our primary role is to repair and overhaul other people’s wheels and brakes. We’re not about buying wheels and brakes and overhauling them as cheaply as possible for us to resell. Also, we respect that our dealer/broker customers are sending us units to overhaul for their sales stock and don’t then want to have to compete with us in the sales market. Consequently, end-users purchasing a unit with World Aero certification know it has been overhauled to a standard, rather than to a price.”

While World Aero works high volumes for large airlines, Randell is also proud of its capability to accommodate ad hoc requirements. “Our ability to do that is inherent in our workshop layout and the processes involved; we’re able to provide the same standards and speed of service to our one-off customers as we do to our regulars.” He declines to elaborate on the key processes and working arrangements, but notes: “Although we have a large customer spread, it’s important not to turn away single jobs – they’re something other MROs often struggle with.”

Brake harvest

Specialising in aircraft end of life services, Caerphilly, Wales-based AerFin considers overhauled brakes among the most common assets harvested from any relatively young airframe it breaks down. Richard Jowett, Vice President Purchasing and Programs, explains: “Wheels and brakes are rotable parts, meaning they can be rebuilt, overhauled, returned to inventory and used to maintain aircraft. From an aircraft tear-down perspective, it’s crucial to know the history of the wheel and brake so the work scope, usage and value of the components can be determined. This will influence the decision to remove the unit from the aircraft ‘on condition’ or to route it to a workshop for refurbishment.

“As part of the evaluation process of a brake, we measure the unit’s remaining life, which helps establish its value. It will then either be removed and sold in AR [as removed] condition, or go to a workshop for OH [overhaul]. In both instances, we retain the remaining carbon heat-pack [most brakes use carbon, not steel], as this also helps determine its sale value.

 “Customers are most interested in the remaining life, since this can be used to calculate and predict the expected number of landings they can achieve from a unit before having to remove it and install a full life heat-pack. We may decide, depending on the remaining life, to install a 100% heat-pack in the unit there and then, or to sell or exchange it in an OH condition. „

“When it comes to wheels, in most cases we remove the wheel from the aircraft and send it straight to an MRO shop for overhaul, before trading it without the tyre. This is popular with airlines, since it offers them the opportunity to select their tyre of choice, to be fitted by AerFin or their appointed workshop. Surplus tyres hold their value too; we keep them in our inventory for resale once they’re been overhauled and retreaded.”

Since complete records for the wheel and brake components AerFin takes in are seldom available, Jowett says quality and safety are guaranteed by other means. “We usually route the wheel and brake unit to an MRO for overhaul. We then resell the component in a serviceable condition, but it must be complete with trace documentation back to its last operator/owner and a non-incident statement [NIS]. Overhaul generates a history and a workshop report to add to the trace documentation and NIS received with the components.” A full trail, from original delivery, is ‘nice to have, but certainly not essential’, he says. >>


To download the PDF file for this article, you have to pay the amount by pressing the PayPal button below!

Filename: Wheels down, brakes on.pdf
Price: £10

Contact our team for more information!


You must be logged in to post a comment.

Please login or sign up for a free account.

Disclaimer text: The views expressed in the above comments do not necessarily express the views of Air Transport Publications Ltd. or any of its publications.